1. Music & Audio
  2. Audio Production

A Guide to Ghost Snares in MIDI

Scroll to top
Read Time: 5 min
This post is part of a series called Manipulating MIDI: Setup, Sequencing and Secrets.
Making Your MIDI Strings Even More Realistic
Bring Your MIDI Drums to Life

Ghosted Snares are quite common in drumming, and although you can't quite hear them clearly in a complete mix, they add a lot to the feel of the song. Whether you're looking to add something extra to an already funky groove, or if you're building a pattern from scratch, this tutorial's got you covered.

Republished Tutorial

Every few weeks, we revisit some of our reader's favorite posts from throughout the history of the site. This tutorial was first published in February of 2010.

First I want to begin with a working definition. For this tutorial, ghost snares will refer to quiet snare hits that are added for extra groove. Also note that this tutorial will apply to all DAWs with a MIDI editor.

Technique 1: Adding Funk

First I'll start with a pattern that I played in on a keyboard and then adjusted.

Although the pattern does have all the benefits of playing from a keyboard, which are varied velocities and imperfect timing, it could use some rolls to add more realism to it.

For this technique, you'll want to turn off your DAW's snapping feature, so that you can place notes anywhere. By adding a short, quieter snare just before some of the hard snares, it has a bit of a drumroll effect. Compare this audio to the previous audio, and you can see how adding barely audible snare hits in a grace note fashion can make a pattern sound more interesting. Note that I also adjusted the double kick that starts the second bar.

Technique 2: Breaks

Next I'm going to use an example that I will create solely by painting in the drum hits individually. Here's a common pattern heard in Drum N Bass songs:

It's a good starting point, but rather uninteresting. Let's place some ghost notes in the piano roll that would be step 8 and 10 on a drum machine, as well as an even quieter ghost snare on step 16.

We can add more bounce to the pattern by adding a ghosted kick. We could add this just about anywhere in the pattern and it would work, but here's where I put mine. Having the ghost kick lead into the first ghost snare has a nice bounce to it.

Making the ghost notes slightly different in each bar can turn a one-bar loop into a less-repetitive two-bar loop, while still retaining the overall feel. In this next example, the first bar and the second bar are the same, except in the second bar, I had the ghost kick switch places with the nearest ghost snare (see image). For more variety, I also moved the final ghost snare a half step.

Technique 3: Drum Rolls

Since drum rolls are a collection of rhythmic grace notes, we can apply our ghost note strategies to create them. One way of getting set up for a drum roll is place your emphasized snares first. In this roll I know I want each beat to be emphasized, so this is how I set it up. It's not going to sound like much, but it is a starting point:

In the end, we might remove the kick but I'm using the kick as a metronome so that I don't get lost in the shuffles. We're going to get more complicated with each step, and in this step this means adding two shorter notes between each of the snares. Then, I'm going to add a note between each of the smaller snares.

Before moving forward, we should change the velocities of the snares to make it more realistic and hear what we should do next. Go through the hits and change the velocities, getting slightly louder as you go but making a zig-zag formation. Though I will ramp up the volume of the "on-beat" snares, I'll keep them louder than the snares around it.

Drum rolls tend to get more intense at the end, so we should add more snares in the missing spots. I copied the green "emphasized" snares and moved them over a step as a shortcut. I also took out some of the off-beat snares near the end, and I brought in the kick to reinforce it.

Keep in mind that most drum rolls need more time to develop, and they need to work with the other instruments in the song to build real tension, but hopefully this short example will get you started.

Final General tips

  • If you're editing MIDI, making Ghosted Snare patterns before making the hat pattern is a good idea, because then you can have interplay between the two. Also, keep in mind that there's a limit to how many things a drummer can do at once.
  • When working with ghost notes to turn one-bar loops into four-bar loops, start with the first bar being the simplest, then get slighter more complex in the second and third bars, and in the fourth bar look for a way to make a slight change.
  • To avoid the machine-gun sound in rolls, consider randomly changing the pitch of each hit slightly, or make multiple versions of the same sample, using various pitch envelopes and filters, to create your own multi-velocity snare group.
Did you find this post useful?
Want a weekly email summary?
Subscribe below and we’ll send you a weekly email summary of all new Music & Audio tutorials. Never miss out on learning about the next big thing.
Looking for something to help kick start your next project?
Envato Market has a range of items for sale to help get you started.