1. Music & Audio
  2. Audio Production

How to Achieve Realistic Spatial Imaging Using Kontakt

Scroll to top
Read Time: 6 min

When you are using sampled instruments, good spatial imaging can make the difference between obviously fake-sounding mixes and a great ensemble sound that is realistic and pleasing to listen to. This is especially important when you are emulating an orchestra or a chamber ensemble.

In this tutorial I will show you how to create realistic spatial imaging from scratch. Many sample libraries come with instruments prerecorded in fixed positions in a particular studio or hall. This has the disadvantage of you not being able to create your own custom ensembles and spaces.

For this tutorial I will be using Kontakt. Kontakt comes with a good selection of instruments from the VSL (Vienna Symphonic Library) and allows you to configure all spatial aspects of the instruments individually.

Note: The changes made in each step can make fairly subtle differences that might not be audible on first hearings in the examples. However, added together they are a powerful toolkit for creating an impression of space and depth.

Step 1

Open a new project. Load Kontakt as an instrument. Then inside Kontakt load two instances of the Violin ens 14 (all X) instrument (for Violins 1 and 2), and one instance each of Viola ens 10 (all X), Cello ens 8 (all X) as well as Bass ens 6 (all X). This gives us a basic medium-sized string ensemble.

Audio Example 1: Strings with factory settings.

Step 2

As we want to customize the ensemble to our own needs, we are going to take out the reverb that is assigned to each instrument in Kontakt by setting the reverb for each instrument (Violin 1, 2, Viola, Cello and Bass) to "bypass".

Audio Example 2: Strings without reverb.

Step 3

Right now the instruments are all panned to the centre which does not reflect how they are laid out in an orchestra. So we're going to spread them out. Adjust the stereo position so that they are as follows: Violin 1 - L50, Violin 2 - L25, Viola - 0, Cello - R25, Bass - R50.

Audio Example 3: Strings panned.

Step 4

Now the instruments are in the right place, but if you listen carefully, they are too wide. This is because each individual section is recorded in full stereo width - this would be appropriate if we were replicating the sound you could hear standing right in front of one section only, but this is not how they appear in an ensemble.

We are going to use Kontakt's Stereo Modeller to reduce the width of each section. To do this, add the Stereo Modeller for each instrument in the Group Fx chain and move the "Spread" wheel to a setting of around -45.

Audio Example 4: Strings stereolimited.

Step 5

Now we're going to add a second group of instruments. Add another Kontakt player as a Cubase instrument and load two instances each of Flute (all X) and Clarinet (all X). This will give us a small woodwind section with double flutes and clarinets.

Make sure the master volume for this player is substantially lower than for the strings as it contains only 4 players versus the 52 players in the string section! Also, set the "Location" setting for each instance's reverb to "bypass".

Audio Example 5: Strings with woodwind factory settings.

Step 6

As with the strings, pan the different woodwind instruments to different positions. Bear in mind that each one is only an individual instrument and they are positioned behind the strings, so the total angle is smaller than for the strings (L50 to R50).

Let's go with something like L36, L18, R18, R36 for flutes 1 and 2 and clarinet 1 and 2 in that order.

Audio Example 6: Strings with woodwind panned.

Step 7

Again, as with the strings, adjust the stereo width of flutes and clarinets with the help of the stereo modeller. Since we are dealing with actual individual instruments whose stereo image is narrower than that for a whole section, use stronger settings for this (-60).

Audio Example 7: Strings with woodwind panned and stereolimited.

Step 8

Now we are going to use a little trick to add to the sense of depth. In an orchestra pit, the woodwinds are behind the strings. This means that the soundwaves from it reach the audience slightly later than those of the strings.

We can use this fact to our advantage by delaying the whole woodwind section by a few milliseconds.

To do this, add Cubase's MonoDelay plugin in the Insert Chain for the Woodwind section Kontakt player, with the following settings: Delay: 20, Feedback: 0, Lo Filter: off, Hi: Filter: off, Mix: 100.

Audio Example 8: Strings with woodwind delayed.

Step 9

There is another fact about how sound travels that we can exploit to add to the sense of depth. Higher frequencies move through air less easily than lower frequencies. This means that a sound source that is a certain distance away loses high frequency content.

So by inserting a gentle EQ with a high shelf around 4000Hz and gain of around -3 into the Woodwind Insert Chain we can reinforce the impression of the woods being further away from the strings.

Audio Example 9: Strings with woodwind EQed.

Step 10

This almost completes our tutorial. To finish off the spatial imaging, we are now going to add reverb to both sections. Cubase's "RoomWorks" reverb plugin has some good "Surround" presets that are natural-sounding spaces and great to use on an orchestra.

Add an instance of the plugin to the Insert Chain of both Strings and Woodwinds. I've chosen the "Surround Chamber" preset because it goes with the small ensemble sound we've been creating.

Audio Example 10: Strings and woodwind final result.

That's it! We've created a fairly realistic medium-size ensemble sound from scratch, with two sections at different depths. You can now take the same principles and apply them to any kind of ensemble/band you want to emulate.

For example, you could add a brass or percussion section with more extreme delay and EQ high frequency shelf settings than the woodwinds to place them in the third "row", so to speak.

Did you find this post useful?
Want a weekly email summary?
Subscribe below and we’ll send you a weekly email summary of all new Music & Audio tutorials. Never miss out on learning about the next big thing.
Looking for something to help kick start your next project?
Envato Market has a range of items for sale to help get you started.